reiorew.blogg.se - Allen bradley 9300 usbs driver

#Allen bradley 9300 usbs driver serial
#Allen bradley 9300 usbs driver plus
#Allen bradley 9300 usbs driver series

If you need to connect to a SLC-500, SLC-5/01, or SLC-5/02, you’ve likely used the large and unwieldy 1747-PIC in the past. If you’re looking for a third party USBS which works great and also does support RSLinx’s auto config look no further that this unit which I’ve personally tested and found works like a charm:

#Allen bradley 9300 usbs driver serial

If you do buy a third party USB to serial cable I recommend keeping the receipt and testing it right away as you don’t want to find out it’s not compatible when you need it the most. In the past I’ve purchased USB to serial converter devices which looked identical to the 9300-USBS for one tenth the price and they’ve worked well except for the lack of support of “auto configure.” However, with a list price of $144, that may be a feature you’re willing to give up.

It’s also one of the few USB serial cables on the market which also supports RSLinx Classic’s “auto configure” option for finding the baud rate of the serial device connected.

#Allen bradley 9300 usbs driver series

Rockwell makes the 9300-USBS, which is currently at rev 3 (aka series C) and is fully tested with all A-B products and serial cables.

ANC-120e: USB to Data Highway Plus, a lower cost alternative to the U2DHPĮven though new laptops don’t have a nine pin serial port, most of us still have many devices in the field with them, so this cable is one of the first you’ll want to consider buying.

#Allen bradley 9300 usbs driver plus

In late 2016 I had the good fortune to test the much lower cost ANC-120e USB to Data Highway Plus cable and you can find all the details using the below link: It essentially replaces the need to carry a Cisco Console cable and USB to Serial converter.ĪNC-120e: USB to Data Highway Plus, a lower cost alternative to the U2DHP This cable is for directly connecting to a Cisco or Stratix switch from a USB port. NOTE: Rockwell's original documentation stated this cable also worked with some PanelView Plus models however NO PVPlus models have a 8 Pin Mini Din port. Provides a quick and easy connection directly to a controller’s 8 Pin Mini-Din serial port via USB, and supports RSLinx's Auto-Configure feature.Ĭomes in high visibility orange and eliminates the need to use a 9300-USBS and 1761-CBL-PM02. Provides a quick and easy connection directly to a controller’s 9 Pin D-Shell serial port via USB, supports RSLinx's Auto-Configure feature, and eliminates the need for the 9300-USBS and 1747-CP3/1756-CP3 cable combination.Ĭomes in high visibility orange and includes “null modem adapter” for use with DCE devices like most PanelView terminals. This summer Rockwell released three new USB cables: So whether you need to communicate via RS-232, DH-485, DF1, DH+, DeviceNet, ControlNet, or to a legacy A-B PLC, VFD, or HMI, you should find a USB cable that can do just that in today's article: The good news is most all legacy A-B networks can be connected to with the use of USB cable.īut while USB to Serial cables are affordable, the USB cables that replace the legacy PCMCIA cards are just as expensive as the cable they replace. But when our old laptop dies, or a new one arrives, it's very unlikely to have either a Serial Port or PCMCIA slot.

For decades we’ve relied on our laptop’s trusty Serial Port or PCMCIA Slot to communicate with legacy A-B devices.